Re: [BULK] Re: [WebDNA] Candidate versions release
This WebDNA talk-list message is from 2010
It keeps the original formatting.
numero = 105368
interpreted = N
texte = On Jun 16, 2010, at 17:03, Palle Bo Nielsen wrote: > Hi Christophe, >=20 > Ok, to be sure that we aligned here... >=20 > The Mac OS X webdna.fcgi works on both the Mac OS X Client and Mac OS = X Server. exact: the WebDNA.fascgi is built for OSX. The kernel is the same for = OSX and OSX server. The only difference is the apache configuration: OSX = is preset to serve one single site in /Library/WebServer/Documents/ = while OSX server is preset to server multiple vhosts, with or without = dedicated IPs. The difference is the way each vhost is configured, and = it is all within one configuration file, httpd.conf (and its included = subfiles). Finding the proper modifications to write in this file will = allow webdna.fcgi to run in OSX server, one copy per vhost. - chris > So what is the difference? Is it that the installation/setup procedure = is tested on the Client version of Mac OS X and that the Server version = of Mac OS X might need some manual additions to the installation/setup? = If this is the case, then how do you intent to close the gap unless I = misunderstand something completely. >=20 > I look forward to you reply. >=20 > Palle >=20 >=20 > On 16/06/2010, at 21.41, christophe.billiottet@webdna.us wrote: >=20 >> The OSX and OSX server webdna.fcgi version is the same one. The only = difference is the way to setup the webserver. >>=20 >> - chris >>=20 >>=20 >> On Jun 16, 2010, at 15:31, Palle Bo Nielsen wrote: >>=20 >>> Okay, I will wait until there is a Mac OS X Server release candidate = - i think. >>>=20 >>> As an Apple developer you can download a free time limited mac os x = server @ Apple >>>=20 >>> Palle >>>=20 >>>=20 >>> On 16/06/2010, at 19.10, christophe.billiottet@webdna.us wrote: >>>=20 >>>> Yes, it will work, but without a OSX server for testing purpose, we = don't know yet what the exact configuration will be. >>>>=20 >>>> - chris >>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D >>>> WebDNA Software Corporation >>>> 16192 Coastal Highway >>>> Lewes, DE 19958 >>>>=20 >>>> On Jun 16, 2010, at 14:02, Palle Bo Nielsen wrote: >>>>=20 >>>>> Hi Christophe, >>>>>=20 >>>>> Is the version below to be used on a MAC OS X SERVER 10.6.x = (Intel) ? >>>>>=20 >>>>> Best Regards >>>>> Palle >>>>>=20 >>>>>=20 >>>>> On 16/06/2010, at 18.42, christophe.billiottet@webdna.us wrote: >>>>>=20 >>>>>> You can run one copy per vhost on a server. We did not test yet = under cPanel, but you will find explanations below to experiment by = yourself. The administration URL will be http://your = domain/cgi-bin/WebCatalogEngine/Admin/AdminPrefs.dna or = http://localhost/cgi-bin/WebCatalogEngine/Admin/AdminPrefs.dna >>>>>>=20 >>>>>>=20 >>>>>> Download the http://www.webdna.us/download/WebCatalogEngine.zip = and move it to your /cgi-bin >>>>>> The /WebCatalog directory does not exist anymore. Everything is = inside /WebCatalogEngine >>>>>>=20 >>>>>> Move the WebDNA.fcgi you want inside the WebCatalogEngine folder. = Chmod 755. >>>>>>=20 >>>>>>=20 >>>>>> Mac OSX intel 64bits. >>>>>> http://www.webdna.us/download/WebDNA-OSX.zip >>>>>>=20 >>>>>> Linux glibcv2 32bits for RH, Fedora, and Centos >>>>>> http://www.webdna.us/download/WebDNA-centos386.zip >>>>>>=20 >>>>>> Linux glibcv2 64bits for RH, Fedora, and Centos >>>>>> http://www.webdna.us/download/WebDNA-centos64.zip >>>>>>=20 >>>>>> Linux glibcv3 for OpenSuse, Ubuntu >>>>>> http://www.webdna.us/download/WebDNA-glibcv3-x86_64.zip >>>>>>=20 >>>>>> FreeBSD 64 bits >>>>>> http://www.webdna.us/download/WebDNA-freebsd64.zip >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 1.- If your page keeps requesting a login and password, though = you are using the default admin / admin >>>>>> This is a redirect problem solved by adding this to you = httpd.conf >>>>>> (of course, the rewrite module must be active) >>>>>>=20 >>>>>> #--------------------------------- >>>>>>
>>>>>> RewriteEngine on >>>>>> RewriteRule .* - [E=3DHTTP_AUTHORIZATION:%{HTTP:Authorization},L] >>>>>> >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 2.- If your webdna administration page does not load the images >>>>>>=20 >>>>>> This problem is due to the ScriptAlias, that makes apache = consider all the files in /cgi-bin as script. >>>>>> ScriptAlias is not needed anymore if you move your cgi-bin inside = the vhost hierarchy. >>>>>>=20 >>>>>> 3.- you can add this for security purpose; it will disallow = apache display some files >>>>>>=20 >>>>>> #--------------------------------- >>>>>>
>>>>>> Deny from all = =20 >>>>>> =20 >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.- These are several configuration suggestions: >>>>>>=20 >>>>>>=20 >>>>>> 4.1.- httpd.conf will load the FastCGI module with this line >>>>>>=20 >>>>>> #--------------------------------- >>>>>> LoadModule fcgid_module modules/mod_fcgid.so >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.2.- you will also have had to add this line for a CentOS: >>>>>>=20 >>>>>> #--------------------------------- >>>>>> SocketPath run/mod_fcgid >>>>>> #--------------------------------- >>>>>>=20 >>>>>> Here the .htaccess on a CentOS server: >>>>>> #--------------------------------- >>>>>> Options All +ExecCGI >>>>>> AddHandler fcgid-script .dna >>>>>> FCGIWrapper /your-path-to/cgi-bin/WebCatalogEngine/WebDNA.fcgi = .dna >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.3.- you will have this line in a FreeBSD: >>>>>> #--------------------------------- >>>>>> AllowOverrride All >>>>>> #--------------------------------- >>>>>>=20 >>>>>> Here the .htaccess on a FreeBSD server: >>>>>> #--------------------------------- >>>>>> AddHandler fcgid-script .dna = =20 >>>>>> Action fcigd-script /cgi-bin/WebCatalogEngine/WebDNA.fcgi = = =20 >>>>>> Options +ExecCGI = = =20 >>>>>>=20 >>>>>> FCGIWrapper /your-path-to/cgi-bin/WebCatalogEngine/WebDNA.fcgi = .dna >>>>>> #--------------------------------- >>>>>>=20 >>>>>>=20 >>>>>> 4.5- OSX will just need this in the httpd.conf >>>>>>=20 >>>>>> #----------------------- >>>>>>
>>>>>> FastCGIServer = /Library/WebServer/CGI-Executables/WebCatalogEngine/WebDNA.fcgi = -idle-timeout 60 -processes 1 >>>>>> Action webdna-fastcgi /cgi-bin/WebCatalogEngine/WebDNA.fcgi >>>>>> AddHandler webdna-fastcgi .dna .tpl .zarc >>>>>> >>>>>>
>>>>>> RewriteEngine on >>>>>> RewriteRule .* - [E=3DHTTP_AUTHORIZATION:%{HTTP:Authorization},L] >>>>>> >>>>>> #----------------------- >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 5.- SuExec >>>>>> If your server runs more than a single copy, then you should use = SuExec to secure your installation: SuExec will make each WebDNA copy = run under the UID:GID of the vhost it is installed in, and therefore, = will have limited permissions. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> Here an example of how to setup suexec under cPanel; It might be = a matter of doing this: >>>>>>=20 >>>>>> 5.1.- Install WebDNA on the server in some location such as = /opt/WebDNA . Make sure it is readable and executable by all users. >>>>>>=20 >>>>>> 5.2.- Go into EasyApache in WHM. Click the button to "Start = customizing based on profile". Be sure the following two options are = selected, and then rebuild Apache: >>>>>> Apache 2.2 >>>>>> Mod FCGID >>>>>>=20 >>>>>> 5.3.- Go into Apache Configuration in WHM. Click on "PHP and = SuExec Configuration". Make sure that Apache suEXEC is set to "On". >>>>>>=20 >>>>>> 5.4.- Go into Apache Configuration in WHM. Click on "Include = Editor". Click "I wish to edit the Post VirtualHost configuration for" = and then "All versions". Add the following line: >>>>>> FcgidWrapper /opt/WebDNA/WebDNA.fcgi .dna >>>>>>=20 >>>>>> Then click Update. >>>>>>=20 >>>>>> 5.5.- Go into Apache Configuration in WHM. Click on = DirectoryIndex Priority. Click "Add". Type in "index.dna". Then click = "Save". >>>>>>=20 >>>>>>=20 >>>>>> That might be it, although we have not tested yet. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 6.- cPanel vhost install >>>>>>=20 >>>>>> Here if you want to run one copy per vhost: >>>>>>=20 >>>>>> 6.1.- Go into EasyApache in WHM. Click the button to "Start = customizing based on profile". Be sure the following two options are = selected, and then rebuild Apache: >>>>>> Apache 2.2 >>>>>> Mod FCGID >>>>>>=20 >>>>>> 6.2.- Go into Apache Configuration in WHM. Click on "PHP and = SuExec Configuration". Make sure that Apache suEXEC is set to "On". >>>>>>=20 >>>>>> 6.3.- Go into Apache Configuration in WHM. Click on = DirectoryIndex Priority. Click "Add". Type in "index.dna". Then click = "Save". >>>>>>=20 >>>>>> 6.4.) Install WebDNA on the server in the home directory of the = user who wants to use it. As an example, if this is for user "testuser" = who owns "testdomain.com", we would install it in: >>>>>> /home/testuser/WebDNA >>>>>> Make sure the files are owned by "testuser". >>>>>>=20 >>>>>> 6.5.- As root, create two new files called: >>>>>>=20 >>>>>> = /usr/local/apache/conf/userdata/std/2/testuser/testdomain.com/webdna.conf >>>>>> = /usr/local/apache/conf/userdata/ssl/2/testuser/testdomain.com/webdna.conf >>>>>>=20 >>>>>> Put the following text into both files: >>>>>>=20 >>>>>> FcgidWrapper /home/testuser/WebDNA/WebDNA.fcgi .dna >>>>>>=20 >>>>>>=20 >>>>>> 6.6.- Execute the following command as root: >>>>>> /scripts/ensure_vhost_includes --all-users >>>>>>=20 >>>>>> 6.7.- Repeat steps 4-6 for any additional users who want to use = WebDNA. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> = ******************************************************************** >>>>>> DISCLAIMER: these informations are provided for testing purpose. = They are not intended for a production environment. >>>>>> = ******************************************************************** >>>>>>=20 >>>>>> - chris >>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D >>>>>> WebDNA Software Corporation >>>>>> 16192 Coastal Highway >>>>>> Lewes, DE 19958 >>>>>>=20 >>>>>> --------------------------------------------------------- >>>>>> This message is sent to you because you are subscribed to >>>>>> the mailing list
. >>>>>> To unsubscribe, E-mail to: >>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>> old archives: http://dev.webdna.us/TalkListArchive/ >>>>>> Bug Reporting: = http://forum.webdna.us/eucabb.html?page=3Dtopics&category(8 >>>>>>=20 >>>>>=20 >>>>=20 >>>>=20 >>>=20 >>=20 >>=20 >=20
Associated Messages, from the most recent to the oldest:
On Jun 16, 2010, at 17:03, Palle Bo Nielsen wrote: > Hi Christophe, >=20 > Ok, to be sure that we aligned here... >=20 > The Mac OS X webdna.fcgi works on both the Mac OS X Client and Mac OS = X Server. exact: the WebDNA.fascgi is built for OSX. The kernel is the same for = OSX and OSX server. The only difference is the apache configuration: OSX = is preset to serve one single site in /Library/WebServer/Documents/ = while OSX server is preset to server multiple vhosts, with or without = dedicated IPs. The difference is the way each vhost is configured, and = it is all within one configuration file, httpd.conf (and its included = subfiles). Finding the proper modifications to write in this file will = allow webdna.fcgi to run in OSX server, one copy per vhost. - chris > So what is the difference? Is it that the installation/setup procedure = is tested on the Client version of Mac OS X and that the Server version = of Mac OS X might need some manual additions to the installation/setup? = If this is the case, then how do you intent to close the gap unless I = misunderstand something completely. >=20 > I look forward to you reply. >=20 > Palle >=20 >=20 > On 16/06/2010, at 21.41, christophe.billiottet@webdna.us wrote: >=20 >> The OSX and OSX server webdna.fcgi version is the same one. The only = difference is the way to setup the webserver. >>=20 >> - chris >>=20 >>=20 >> On Jun 16, 2010, at 15:31, Palle Bo Nielsen wrote: >>=20 >>> Okay, I will wait until there is a Mac OS X Server release candidate = - i think. >>>=20 >>> As an Apple developer you can download a free time limited mac os x = server @ Apple >>>=20 >>> Palle >>>=20 >>>=20 >>> On 16/06/2010, at 19.10, christophe.billiottet@webdna.us wrote: >>>=20 >>>> Yes, it will work, but without a OSX server for testing purpose, we = don't know yet what the exact configuration will be. >>>>=20 >>>> - chris >>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D >>>> WebDNA Software Corporation >>>> 16192 Coastal Highway >>>> Lewes, DE 19958 >>>>=20 >>>> On Jun 16, 2010, at 14:02, Palle Bo Nielsen wrote: >>>>=20 >>>>> Hi Christophe, >>>>>=20 >>>>> Is the version below to be used on a MAC OS X SERVER 10.6.x = (Intel) ? >>>>>=20 >>>>> Best Regards >>>>> Palle >>>>>=20 >>>>>=20 >>>>> On 16/06/2010, at 18.42, christophe.billiottet@webdna.us wrote: >>>>>=20 >>>>>> You can run one copy per vhost on a server. We did not test yet = under cPanel, but you will find explanations below to experiment by = yourself. The administration URL will be http://your = domain/cgi-bin/WebCatalogEngine/Admin/AdminPrefs.dna or = http://localhost/cgi-bin/WebCatalogEngine/Admin/AdminPrefs.dna >>>>>>=20 >>>>>>=20 >>>>>> Download the http://www.webdna.us/download/WebCatalogEngine.zip = and move it to your /cgi-bin >>>>>> The /WebCatalog directory does not exist anymore. Everything is = inside /WebCatalogEngine >>>>>>=20 >>>>>> Move the WebDNA.fcgi you want inside the WebCatalogEngine folder. = Chmod 755. >>>>>>=20 >>>>>>=20 >>>>>> Mac OSX intel 64bits. >>>>>> http://www.webdna.us/download/WebDNA-OSX.zip >>>>>>=20 >>>>>> Linux glibcv2 32bits for RH, Fedora, and Centos >>>>>> http://www.webdna.us/download/WebDNA-centos386.zip >>>>>>=20 >>>>>> Linux glibcv2 64bits for RH, Fedora, and Centos >>>>>> http://www.webdna.us/download/WebDNA-centos64.zip >>>>>>=20 >>>>>> Linux glibcv3 for OpenSuse, Ubuntu >>>>>> http://www.webdna.us/download/WebDNA-glibcv3-x86_64.zip >>>>>>=20 >>>>>> FreeBSD 64 bits >>>>>> http://www.webdna.us/download/WebDNA-freebsd64.zip >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 1.- If your page keeps requesting a login and password, though = you are using the default admin / admin >>>>>> This is a redirect problem solved by adding this to you = httpd.conf >>>>>> (of course, the rewrite module must be active) >>>>>>=20 >>>>>> #--------------------------------- >>>>>> >>>>>> RewriteEngine on >>>>>> RewriteRule .* - [E=3DHTTP_AUTHORIZATION:%{HTTP:Authorization},L] >>>>>> >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 2.- If your webdna administration page does not load the images >>>>>>=20 >>>>>> This problem is due to the ScriptAlias, that makes apache = consider all the files in /cgi-bin as script. >>>>>> ScriptAlias is not needed anymore if you move your cgi-bin inside = the vhost hierarchy. >>>>>>=20 >>>>>> 3.- you can add this for security purpose; it will disallow = apache display some files >>>>>>=20 >>>>>> #--------------------------------- >>>>>> >>>>>> Deny from all = =20 >>>>>> =20 >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.- These are several configuration suggestions: >>>>>>=20 >>>>>>=20 >>>>>> 4.1.- httpd.conf will load the FastCGI module with this line >>>>>>=20 >>>>>> #--------------------------------- >>>>>> LoadModule fcgid_module modules/mod_fcgid.so >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.2.- you will also have had to add this line for a CentOS: >>>>>>=20 >>>>>> #--------------------------------- >>>>>> SocketPath run/mod_fcgid >>>>>> #--------------------------------- >>>>>>=20 >>>>>> Here the .htaccess on a CentOS server: >>>>>> #--------------------------------- >>>>>> Options All +ExecCGI >>>>>> AddHandler fcgid-script .dna >>>>>> FCGIWrapper /your-path-to/cgi-bin/WebCatalogEngine/WebDNA.fcgi = .dna >>>>>> #--------------------------------- >>>>>>=20 >>>>>> 4.3.- you will have this line in a FreeBSD: >>>>>> #--------------------------------- >>>>>> AllowOverrride All >>>>>> #--------------------------------- >>>>>>=20 >>>>>> Here the .htaccess on a FreeBSD server: >>>>>> #--------------------------------- >>>>>> AddHandler fcgid-script .dna = =20 >>>>>> Action fcigd-script /cgi-bin/WebCatalogEngine/WebDNA.fcgi = = =20 >>>>>> Options +ExecCGI = = =20 >>>>>>=20 >>>>>> FCGIWrapper /your-path-to/cgi-bin/WebCatalogEngine/WebDNA.fcgi = .dna >>>>>> #--------------------------------- >>>>>>=20 >>>>>>=20 >>>>>> 4.5- OSX will just need this in the httpd.conf >>>>>>=20 >>>>>> #----------------------- >>>>>> >>>>>> FastCGIServer = /Library/WebServer/CGI-Executables/WebCatalogEngine/WebDNA.fcgi = -idle-timeout 60 -processes 1 >>>>>> Action webdna-fastcgi /cgi-bin/WebCatalogEngine/WebDNA.fcgi >>>>>> AddHandler webdna-fastcgi .dna .tpl .zarc >>>>>> >>>>>> >>>>>> RewriteEngine on >>>>>> RewriteRule .* - [E=3DHTTP_AUTHORIZATION:%{HTTP:Authorization},L] >>>>>> >>>>>> #----------------------- >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 5.- SuExec >>>>>> If your server runs more than a single copy, then you should use = SuExec to secure your installation: SuExec will make each WebDNA copy = run under the UID:GID of the vhost it is installed in, and therefore, = will have limited permissions. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> Here an example of how to setup suexec under cPanel; It might be = a matter of doing this: >>>>>>=20 >>>>>> 5.1.- Install WebDNA on the server in some location such as = /opt/WebDNA . Make sure it is readable and executable by all users. >>>>>>=20 >>>>>> 5.2.- Go into EasyApache in WHM. Click the button to "Start = customizing based on profile". Be sure the following two options are = selected, and then rebuild Apache: >>>>>> Apache 2.2 >>>>>> Mod FCGID >>>>>>=20 >>>>>> 5.3.- Go into Apache Configuration in WHM. Click on "PHP and = SuExec Configuration". Make sure that Apache suEXEC is set to "On". >>>>>>=20 >>>>>> 5.4.- Go into Apache Configuration in WHM. Click on "Include = Editor". Click "I wish to edit the Post VirtualHost configuration for" = and then "All versions". Add the following line: >>>>>> FcgidWrapper /opt/WebDNA/WebDNA.fcgi .dna >>>>>>=20 >>>>>> Then click Update. >>>>>>=20 >>>>>> 5.5.- Go into Apache Configuration in WHM. Click on = DirectoryIndex Priority. Click "Add". Type in "index.dna". Then click = "Save". >>>>>>=20 >>>>>>=20 >>>>>> That might be it, although we have not tested yet. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> 6.- cPanel vhost install >>>>>>=20 >>>>>> Here if you want to run one copy per vhost: >>>>>>=20 >>>>>> 6.1.- Go into EasyApache in WHM. Click the button to "Start = customizing based on profile". Be sure the following two options are = selected, and then rebuild Apache: >>>>>> Apache 2.2 >>>>>> Mod FCGID >>>>>>=20 >>>>>> 6.2.- Go into Apache Configuration in WHM. Click on "PHP and = SuExec Configuration". Make sure that Apache suEXEC is set to "On". >>>>>>=20 >>>>>> 6.3.- Go into Apache Configuration in WHM. Click on = DirectoryIndex Priority. Click "Add". Type in "index.dna". Then click = "Save". >>>>>>=20 >>>>>> 6.4.) Install WebDNA on the server in the home directory of the = user who wants to use it. As an example, if this is for user "testuser" = who owns "testdomain.com", we would install it in: >>>>>> /home/testuser/WebDNA >>>>>> Make sure the files are owned by "testuser". >>>>>>=20 >>>>>> 6.5.- As root, create two new files called: >>>>>>=20 >>>>>> = /usr/local/apache/conf/userdata/std/2/testuser/testdomain.com/webdna.conf >>>>>> = /usr/local/apache/conf/userdata/ssl/2/testuser/testdomain.com/webdna.conf >>>>>>=20 >>>>>> Put the following text into both files: >>>>>>=20 >>>>>> FcgidWrapper /home/testuser/WebDNA/WebDNA.fcgi .dna >>>>>>=20 >>>>>>=20 >>>>>> 6.6.- Execute the following command as root: >>>>>> /scripts/ensure_vhost_includes --all-users >>>>>>=20 >>>>>> 6.7.- Repeat steps 4-6 for any additional users who want to use = WebDNA. >>>>>>=20 >>>>>>=20 >>>>>>=20 >>>>>> = ******************************************************************** >>>>>> DISCLAIMER: these informations are provided for testing purpose. = They are not intended for a production environment. >>>>>> = ******************************************************************** >>>>>>=20 >>>>>> - chris >>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D >>>>>> WebDNA Software Corporation >>>>>> 16192 Coastal Highway >>>>>> Lewes, DE 19958 >>>>>>=20 >>>>>> --------------------------------------------------------- >>>>>> This message is sent to you because you are subscribed to >>>>>> the mailing list . >>>>>> To unsubscribe, E-mail to: >>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>> old archives: http://dev.webdna.us/TalkListArchive/ >>>>>> Bug Reporting: = http://forum.webdna.us/eucabb.html?page=3Dtopics&category(8 >>>>>>=20 >>>>>=20 >>>>=20 >>>>=20 >>>=20 >>=20 >>=20 >=20
christophe.billiottet@webdna.us
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
Sorting LISTFILES (1997)
[Way OT] Workstation Security (2002)
Digital Postcards (1999)
WebCat2b15MacPlugIn - [authenticate] not [protect] (1997)
Include a big block of text (1997)
why .HTML pages no processing? (2000)
Getting total number of items ordered (1997)
Another Flash Question (2000)
No. of items in shopping cart (2000)
programmer help needed (1998)
Using [showif] (2000)
filemaker - orderfile (1997)
Help formatting search results w/ table (1997)
Bug or syntax error on my part? (1997)
Stopping bad HTML propagation ? (1997)
A question on sub-categories (1997)
Great product and great job ! (1997)
Re:FYI: Error message (1996)
webdelivery.html and webna (1997)
RE: Tax and ShipCost Problem (1997)