[OT] XServe networking PITA

This WebDNA talk-list message is from

2004


It keeps the original formatting.
numero = 60533
interpreted = N
texte = Sorry for the OT, but this one has me tearing my hair out. We have two XServes in house. One is a web server and the other is a combination CGPro Mailserver, Nameserver and Retrospect server for backup of the PCs on the LAN. We have a NetGear FVL328 Firewall/Router, and 13 static IPs. This office has a DSL connection from Verizon via a DSL modem, which has one ethernet port. The Netgear has 8 LAN ports and 1 WAN port and is acting as a DCHP server for the private clients on the LAN. Problem is, I can find no combination of settings that will allow the servers to be exposed to the internet and clients on the LAN, while at the same time giving the LAN clients access to the internet. I've tried setting up the firewall with NAT, and placing the servers in a DMZ to no avail. The best I can get with this setup is the servers visible to the internet, but then no clients on the LAN have internet access. We have 13 class C IPs and a gateway IP, which is 66.15.112.1. Apparently, this DSL modem is not a router, but just directs all traffic to the gateway IP. Settings: XServes' Built in Ethernet: IP is manually set to the public IP according to our DNS setup, router is set to 66.15.112.1 XServes' PCI Ethernet: Private IPs assigned by DHCP, router is 192.168.0.1 Firewall: WAN IP is one of the public IPs, gateway is set to 66.15.112.1. LAN IP is 192.168.0.1, NAT is on. DMZ is maps private IP of XServe assigned by DHCP server ---> public IP of each server according to DNS. A thousand blessings and a camel to the kind soul that can help me get this working! Regards, Will Starck -- NovaDerm Skincare Science http://www.novaderm.com wjs@novaderm.com 817-431-8437 ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/ Associated Messages, from the most recent to the oldest:

    
  1. Re: [OT] XServe networking PITA ( "Sal D'Anna" 2004)
  2. Re: [OT] XServe networking PITA ( "Ross Markbreiter" 2004)
  3. Re: [OT] XServe networking PITA ( "Will Starck" 2004)
  4. Re: [OT] XServe networking PITA ( "Will Starck" 2004)
  5. Re: [OT] XServe networking PITA ( devaulw@onebox.com 2004)
  6. Re: [OT] XServe networking PITA ( Vijay-Kumar Solanki 2004)
  7. [OT] XServe networking PITA ( WJ Starck 2004)
Sorry for the OT, but this one has me tearing my hair out. We have two XServes in house. One is a web server and the other is a combination CGPro Mailserver, Nameserver and Retrospect server for backup of the PCs on the LAN. We have a NetGear FVL328 Firewall/Router, and 13 static IPs. This office has a DSL connection from Verizon via a DSL modem, which has one ethernet port. The Netgear has 8 LAN ports and 1 WAN port and is acting as a DCHP server for the private clients on the LAN. Problem is, I can find no combination of settings that will allow the servers to be exposed to the internet and clients on the LAN, while at the same time giving the LAN clients access to the internet. I've tried setting up the firewall with NAT, and placing the servers in a DMZ to no avail. The best I can get with this setup is the servers visible to the internet, but then no clients on the LAN have internet access. We have 13 class C IPs and a gateway IP, which is 66.15.112.1. Apparently, this DSL modem is not a router, but just directs all traffic to the gateway IP. Settings: XServes' Built in Ethernet: IP is manually set to the public IP according to our DNS setup, router is set to 66.15.112.1 XServes' PCI Ethernet: Private IPs assigned by DHCP, router is 192.168.0.1 Firewall: WAN IP is one of the public IPs, gateway is set to 66.15.112.1. LAN IP is 192.168.0.1, NAT is on. DMZ is maps private IP of XServe assigned by DHCP server ---> public IP of each server according to DNS. A thousand blessings and a camel to the kind soul that can help me get this working! Regards, Will Starck -- NovaDerm Skincare Science http://www.novaderm.com wjs@novaderm.com 817-431-8437 ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/ WJ Starck

DOWNLOAD WEBDNA NOW!

Top Articles:

Talk List

The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...

Related Readings:

WC TableGrinder (1997) [WebDNA] DNA suffix (2008) OT: Forcing a header when printing web pages (2002) how to know the [LineIndex] number webcat generated during a [AddLineItem]? (2000) WebCat2.0 [format thousands .0f] no go (1997) Document Contains No Data! (1997) The USArea® Network web site ... (1997) [HTML*] (a proposition) (1997) Re:Message Board (1998) Adding non-SKUs to cart (1998) wc 2 pro users - sites, quotes wanted (1997) ... debugger ? (2000) [ot] Any One Want A WebDNA Billing Program? (2003) OT: .biz and .info (2001) [searchString] (1997) Uh...can someone help me out with the b10? (1997) Problems searching from a FORM (1997) [AppendFile] problem (WebCat2b13 Mac .acgi) (1997) politeness (was searches with dash...) (2000) webcat- multiple selection in input field (1997)