numero = 46465
interpreted = N
texte = Folks,The following is a copy of an email that I sent to Terry Wilson, who's a list member that has provided much help on the A/N issue(s). I found that a client of mine was receiving about 30% failure rate on orders, all with the error of Expiration date invalid. The other 70% of the orders were passing fine. This is using A/N and the ADC Relay Response method.The email is as follows: ----------------------------- I just wanted to give you a follow up on what I've found in case you run into the same problem. I placed one of my clients accounts into test mode and then tried to purchase using a 2-digit month on the credit card. All those tests would fail, however with a single-digit exp month, the test would pass. I had added a convertchars around the exp month to convert them to 2 digits per A/N tech:from to 1 01 2 02 3 03 4 04 5 05 6 06 7 07 8 08 9 09 10 10 11 11 12 12If I removed this convertchars, all 2 digit months would now PASS and single digit months would FAIL. If I enabled this convertchars, the opposite became true. So, with a simple showif, I now either use the convertchars or I don't:[showif [expmonth]<10] [/showif] [showif [expmonth]>9] [/showif]All tests thereafter worked.My expyear has remained in the 4 digit format.----------------------I'll report back if this turns out to be incorrect, but in test mode, this seems to be a fix for a problem that I have noticed, but have not seen reported on this list.GK ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Associated Messages, from the most recent to the oldest:
Authorizenet and expiration dates (Gary Krockover 2002)
Folks,The following is a copy of an email that I sent to Terry Wilson, who's a list member that has provided much help on the A/N issue(s). I found that a client of mine was receiving about 30% failure rate on orders, all with the error of Expiration date invalid. The other 70% of the orders were passing fine. This is using A/N and the ADC Relay Response method.The email is as follows: ----------------------------- I just wanted to give you a follow up on what I've found in case you run into the same problem. I placed one of my clients accounts into test mode and then tried to purchase using a 2-digit month on the credit card. All those tests would fail, however with a single-digit exp month, the test would pass. I had added a convertchars around the exp month to convert them to 2 digits per A/N tech:from to 1 01 2 02 3 03 4 04 5 05 6 06 7 07 8 08 9 09 10 10 11 11 12 12If I removed this convertchars, all 2 digit months would now PASS and single digit months would FAIL. If I enabled this convertchars, the opposite became true. So, with a simple showif, I now either use the convertchars or I don't:[showif [expmonth]<10] [/showif] [showif [expmonth]>9] [/showif]All tests thereafter worked.My expyear has remained in the 4 digit format.----------------------I'll report back if this turns out to be incorrect, but in test mode, this seems to be a fix for a problem that I have noticed, but have not seen reported on this list.GK ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Gary Krockover
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...