2018

It keeps the original formatting.

Kind regardsStuart TremainPharoah Lane SoftwareAUSTRALIAwebdna@plsoftware.com.au> On 1 Jun 2018, at 12:08, Diane Blackmore wrote:>=20> Hi>=20> OMG!! You are the bomb. Thanks so much - I=E2=80=99d have been =friggin done for without ya!!>=20> So all working=E2=80=A6 Just one last thing if you would be so kind. =How will I ensure that it=E2=80=99s going to be TLS 1.2? =20>=20>=20> Thanks,>=20> > >> On 1/06/2018, at 1:44 PM, Stuart Tremain > wrote:>>=20>> This works:>>=20>> curl https://www.paystation.co.nz/direct/paystation.dll = -d =paystation=3D_empty -d pstn_nr=3Dt -d pstn_pi=3D616505 -d =pstn_gi=3DDEVELOPMENT -d pstn_ms=3D234457_73721146464 -d pstn_am=3D7400 =-d pstn_pa=3Dt>>=20>>=20>> see how each piece of data is sent>>=20>> -d name=3Dvalue>>=20>> You may need to do=20>>=20>> -d name=3D=E2=80=9Cvalue=E2=80=9D when passing text values>>=20>>=20>>=20>>=20>>=20>> Kind regards>>=20>> Stuart Tremain>> Pharoah Lane Software>> AUSTRALIA>> webdna@plsoftware.com.au >>=20>>=20>>=20>>=20>>=20>>=20>>=20>>> On 1 Jun 2018, at 11:13, Diane Blackmore > wrote:>>>=20>>> Hi>>>=20>>> OK, so I did this from command line (but same response from =webpage);>>>=20>>> curl =https://www.paystation.co.nz/direct/paystation.dll?paystation=3D_empty&pst=n_nr=3Dt&pstn_pi=3D616505&pstn_gi=3DDEVELOPMENT&pstn_ms=3D234457_737211464=64&pstn_am=3D7400&pstn_pa=3Dt =>>>=20>>> but the response comes back that there=E2=80=99s "not enough input =parameters=E2=80=9D (Error:11). This I believe is coming from =Paystation, yet I have all mandatory fields filled.>>>=20>>> https://docs.paystation.co.nz/#authorisation-3-party =>>>=20>>> Is this because there needs to be some sort of pre-initialisation or =handshaking or something?>>>=20>>>=20>>> Thanks,>>>=20>>> >>> >>>> On 1/06/2018, at 12:42 PM, Stuart Tremain > wrote:>>>>=20>>>> It is very easy :)>>>>=20>>>> Kind regards>>>>=20>>>> Stuart Tremain>>>> Pharoah Lane Software>>>> AUSTRALIA>>>> webdna@plsoftware.com.au >>>>=20>>>>=20>>>>=20>>>>=20>>>>=20>>>>=20>>>>=20>>>>> On 1 Jun 2018, at 10:41, Diane Blackmore > wrote:>>>>>=20>>>>> Hi Stuart,>>>>>=20>>>>> Thanks for quick reply. I=E2=80=99m sending a TCPConnect to get an =XML response back. Curl is installed.>>>>> Will try the below - are you online for a bit? The below sounds =too easy ;)>>>>>=20>>>>> Cheers,>>>>>=20>>>>> >>>>> >>>>>> On 1/06/2018, at 12:34 PM, Stuart Tremain => wrote:>>>>>>=20>>>>>> Check that you have curl on the server.>>>>>> Go to cl and type curl =E2=80=94version>>>>>>=20>>>>>> or=20>>>>>>=20>>>>>> curl https://google.com >>>>>>=20>>>>>>=20>>>>>> if you get a response all is good.>>>>>>=20>>>>>> then just build your curl segment in the cl, once it is working =transfer it to your site>>>>>>=20>>>>>> I suspect that it will work something like this:>>>>>>=20>>>>>>=20>>>>>> [SHELL]curl =https:/www.paystation.co.nz//direct/paystation.dll?all-your-variables-here=[/SHELL =]>>>>>>=20>>>>>> Unless you are posting an xml file, then you will need to use =some different curl code>>>>>>=20>>>>>>=20>>>>>> Kind regards>>>>>>=20>>>>>> Stuart Tremain>>>>>> Pharoah Lane Software>>>>>> AUSTRALIA>>>>>> webdna@plsoftware.com.au >>>>>>=20>>>>>>=20>>>>>>=20>>>>>>=20>>>>>>=20>>>>>>=20>>>>>>=20>>>>>>> On 1 Jun 2018, at 10:25, Diane Blackmore > wrote:>>>>>>>=20>>>>>>> Hi>>>>>>>=20>>>>>>> Anyone have a curl written for this in WebDNA as a shell command =yet? I=E2=80=99m scared as heck that my provider is going to switch off =support for below TLS 1.2 and my TCP/IP connect is going to fail after =reading earlier posts on the matter.>>>>>>>=20>>>>>>> I have a client who does multiple orders per hour and this =isn=E2=80=99t going to go down well if I can=E2=80=99t get the payment =gateway working =E2=80=98cos I don=E2=80=99t know jack about curl.>>>>>>>=20>>>>>>> Happy to pay someone for this - I can supply you the WebDNA =TCP/IP and a development site for you to work on. But its URGENT please.>>>>>>>=20>>>>>>>=20>>>>>>> Thanks,>>>>>>>=20>>>>>>> >>>>>>> >>>>>>>> On 28/05/2018, at 9:53 PM, Tom Duke > wrote:>>>>>>>>=20>>>>>>>> Diane,>>>>>>>>=20>>>>>>>> If your server supports the correct version of TLS then the SSL =connection should be good. There is no "TLS=3DT" option with =TCPConnect.>>>>>>>>=20>>>>>>>> Also you might consider using 'curl' in a [shell] command. I =stopped using TCPConnect a long time ago.>>>>>>>>=20>>>>>>>> - Tom>>>>>>>>=20>>>>>>>>=20>>>>>>>>=20>>>>>>>>=20>>>>>>>>=20>>>>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>>>>>>>> Digital Revolutionaries>>>>>>>> 1st Floor, Castleriver House>>>>>>>> 14-15 Parliament Street>>>>>>>> Temple Bar,Dublin 2>>>>>>>> Ireland>>>>>>>> ---------------------------------------------->>>>>>>> [t]: + 353 1 4403907>>>>>>>> [e]: >>>>>>>>> [w]: >>>>>>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>>>>>>>>=20>>>>>>>> On 28 May 2018 at 02:40, Diane Blackmore > wrote:>>>>>>>> Hi>>>>>>>>=20>>>>>>>> Have finally got things to where they need to be server-wise =for my TLS 1.2 migration, however it is timing out and not getting =anywhere. The bolo is the script;>>>>>>>>=20>>>>>>>> [TCPConnect host=3Dwww.paystation.co.nz =&port=3D443&tls=3DT][tcpsend =skipheader=3DT][!]>>>>>>>> [/!]POST /direct/paystation.dll HTTP/1.1[crlf][!]>>>>>>>> [/!]Referer: https://[theDomain][thisURL][crlf][ <>!]>>>>>>>> [/!]Host: www.paystation.co.nz =[crlf][!]>>>>>>>> [/!]Content-Type: application/x-www-form-urlencoded[crlf][!]>>>>>>>> [/!]Content-length: =[countchars][the_variables][/countchars][crlf][!]>>>>>>>> [/!]Connection: close[crlf][!]>>>>>>>> [/!][crlf][!]>>>>>>>> [/!][the_variables][crlf][!]>>>>>>>> [/!][/tcpsend][/TCPConnect]>>>>>>>>=20>>>>>>>> Now, this works just brilliant with SSL=3DT in place of TLS=3DT =but just hangs the way it is above. I figure I must be missing something =- Can anyone provide the correct syntax as there=E2=80=99s nothing in =the docs about TLS at all.>>>>>>>>=20>>>>>>>> One other thought is that the page doing the sending is a =regular page on http/80, rather than being on https/443 - Does this have =any bearing? Ie. Would the request also need to be from a secure site?>>>>>>>>=20>>>>>>>> Thanks in advance,>>>>>>>>=20>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> On 5/03/2018, at 11:32 AM, Stuart Tremain > wrote:>>>>>>>>>=20>>>>>>>>> That looks like an error in the docs>>>>>>>>>=20>>>>>>>>> it should read &port=3D80 or port=3D443>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>> Kind regards>>>>>>>>>=20>>>>>>>>> Stuart Tremain>>>>>>>>> Pharoah Lane Software>>>>>>>>> AUSTRALIA>>>>>>>>> webdna@idfk.com.au >>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>>> On 5 Mar 2018, at 03:18, Bob Knight > wrote:>>>>>>>>>>=20>>>>>>>>>> I have a question regarding this as well.>>>>>>>>>>=20>>>>>>>>>> So after my shipping and creditcard processing stopped =working after the TLS 1.2 update from UPS and Authorize.net = occurred. I discovered it is time to update the =server to the newer OS X 10.12 and the webdna version WebDNA Server =8.5.1 for Apple OS X Sierra .= Now that I have done that and everything appears to be working, I am =still unable to connect to these third party servers using the =[tcpconnect] [tcpsend] parameters that normally worked for the last 15 =years. I tested the connection to the third party servers using a =standard PHP connection from this same (newly installed server) via a =test.php page within the same website and the connection works fine. =But the PHP post is a different setup from the WEBDNA setup so I am not =sure the comparison is actually a good test. But it does show that the =TLS 1.2 is working to the third party servers so I am confident that the =Apache and OS X servers are setup properly. So it leads me to believe =their is something not working correctly within the WEBDNA server when =it comes to the [tcpconnect] [tcpsend] protocol.=20>>>>>>>>>>=20>>>>>>>>>> So in anyones opinion, is it the OS X, the Apache, [webdna =8.5.1] that is keeping the [tcpconnect] [tcpsend] command from working =with third party servers?>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>> [tcpconnect host=3Dinternic.net &portC]>>>>>>>>>> [tcpsend] webdna.us= [unurl] =%0D%0A%0D%0A[/unurl][/tcpsend]=>>>>>>>>>> [/tcpconnect]>>>>>>>>>>=20>>>>>>>>>> --------------------------------------------------------- =This message is sent to you because you are subscribed to the mailing =list talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>>>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >>> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us >> --------------------------------------------------------- This =message is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: =talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 = Bug Reporting: =support@webdna.us > --------------------------------------------------------- This message =is sent to you because you are subscribed to the mailing list =talk@webdna.us To unsubscribe, E-mail to: talk-leave@webdna.us archives: =http://www.webdna.us/page.dna?numero=3D55 Bug Reporting: =support@webdna.us--Apple-Mail=_3BB98C9B-3486-4643-B268-0340B7487E75Content-Transfer-Encoding: quoted-printableContent-Type: text/html;charset=utf-8curl =manual

https://curl.haxx.se/docs/manpage.html

Kind regards

Stuart Tremain

Pharoah Lane Software

AUSTRALIA

webdna@plsoftware.com.au

On 1 Jun 2018, at 12:08, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi

OMG!! You are the =bomb. Thanks so much - I=E2=80=99d have been friggin done for without =ya!!

So all =working=E2=80=A6 Just one last thing if you would be so kind. How will I =ensure that it=E2=80=99s going to be TLS 1.2?

Thanks,
<CohesionSig_Diane12.gi=f>
On 1/06/2018, at 1:44 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
This works:

curl https://www.paystation.co.nz/direct/paystation.dll -d =paystation=3D_empty -d pstn_nr=3Dt -d pstn_pi=3D616505 -d =pstn_gi=3DDEVELOPMENT -d pstn_ms=3D234457_73721146464 -d pstn_am=3D7400 =-d pstn_pa=3Dt

see how each piece of =data is sent

-d =name=3Dvalue

You= may need to do

-d name=3D=E2=80=9Cvalue=E2=80=9D when passing text =values
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 11:13, Diane Blackmore <diane@cohesion.co.nz> wrote:

Hi

OK, so I did this from =command line (but same response from webpage);

curl https://www.paystation.co.nz/direct/paystation.dll?paystation=3D=_empty&pstn_nr=3Dt&pstn_pi=3D616505&pstn_gi=3DDEVELOPMENT&=pstn_ms=3D234457_73721146464&pstn_am=3D7400&pstn_pa=3Dt
<=div class=3D"">
but the response =comes back that there=E2=80=99s "not enough input parameters=E2=80=9D =(Error:11). This I believe is coming from Paystation, yet I have all =mandatory fields filled.

https://docs.paystation.co.nz/#authorisation-3-party
<=div class=3D"">
Is this because =there needs to be some sort of pre-initialisation or handshaking or =something?

Thanks,
<CohesionSig_Diane12.gif>
On 1/06/2018, at 12:42 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
It is very easy :)
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 10:41, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi Stuart,

Thanks for quick reply. =I=E2=80=99m sending a TCPConnect to get an XML response back. Curl is =installed.
Will try the below - are you online for =a bit? The below sounds too easy ;)

Cheers,
<CohesionSig_Diane12.gif>
On 1/06/2018, at 12:34 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
Check that you have =curl on the server.
Go to cl and type curl ==E2=80=94version

or

curl https://google.com

if =you get a response all is good.

then just build your curl segment in =the cl, once it is working transfer it to your site

I suspect that it will =work something like this:

[SHELL]curl https:/www.paystation.co.nz//direct/paystation.dll?all-your-variables-=here[/SHELL]

Unless you are posting an xml file, then you will need to =use some different curl code
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 10:25, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi

Anyone have a curl =written for this in WebDNA as a shell command yet? I=E2=80=99m scared as =heck that my provider is going to switch off support for below TLS 1.2 =and my TCP/IP connect is going to fail after reading earlier posts on =the matter.

I =have a client who does multiple orders per hour and this isn=E2=80=99t =going to go down well if I can=E2=80=99t get the payment gateway working ==E2=80=98cos I don=E2=80=99t know jack about curl.

Happy to pay someone for =this - I can supply you the WebDNA TCP/IP and a development site for you =to work on. But its URGENT please.

Thanks,
<CohesionSig_Diane12.gif>
On 28/05/2018, at 9:53 PM, Tom Duke <tom@revolutionaries.ie> wrote:
Diane,

If =your server supports the correct version of TLS then the SSL connection =should be good. There is no "TLS=3DT" option with =TCPConnect.

Also= you might consider using 'curl' in a [shell] command. I stopped =using TCPConnect a long time ago.

- Tom
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D
Digital Revolutionaries
1st Floor, =Castleriver House
14-15 Parliament Street
Temple Bar,Dublin 2
Ireland
----------------------------------------------
[t]: + 353 1 4403907
[e]: <mailto:tom@revolutionaries.ie>
[w]: <http://www.revolutionaries.ie/>
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
On 28 May 2018 at 02:40, Diane =Blackmore <diane@cohesion.co.nz> wrote:
Hi

Have finally got things to where they =need to be server-wise for my TLS 1.2 migration, however it is timing =out and not getting anywhere. The bolo is the script;

[TCPConnect host=3Dwww.paystation.co.nz&port=3D443&tls=3DT][tcpsend skipheader=3DT][!]
[/!]POST /direct/paystation.dll HTTP/1.1[crlf][!]
[/!]Referer: https://[theDomain][thisURL][crlf][!]
[/!]Host: www.paystation.co.nz[crlf][!]
[/!]Content-Type: application/x-www-form-urlencoded[crlf][!]
[/!]Content-length: =[countchars][the_variables][/countchars][crlf][!]
[/!]Connection: =close[crlf][!]
[/!][crlf][!]
[/!][the_variables][crlf][!]
[/!][/tcpsend][/TCPConnect]

Now, this works just brilliant with =SSL=3DT in place of TLS=3DT but just hangs the way it is above. I figure =I must be missing something - Can anyone provide the correct syntax as =there=E2=80=99s nothing in the docs about TLS at all.

One other thought is =that the page doing the sending is a regular page on http/80, rather =than being on https/443 - Does this have any bearing? Ie. Would the =request also need to be from a secure site?

Thanks in advance,
<CohesionSig_Diane12.gif>
On 5/03/2018, at 11:32 AM, Stuart Tremain =<webdna@idfk.com.au> wrote:
That looks like an error in the docs

it should read &port=3D80 = or port=3D443
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@idfk.com.au
On 5 Mar 2018, at 03:18, Bob Knight <bobioknight@gmail.com> wrote:
I have a =question regarding this as well.

So after my shipping and creditcard processing stopped =working after the TLS 1.2 update from UPS and Authorize.net occurred. I discovered it is time to update =the server to the newer OS X 10.12 and the webdna version WebDNA =Server 8.5.1 for Apple OS X Sierra. Now that I have done that =and everything appears to be working, I am still unable to connect to =these third party servers using the [tcpconnect] [tcpsend] parameters =that normally worked for the last 15 years. I tested the =connection to the third party servers using a standard PHP connection =from this same (newly installed server) via a test.php page within the =same website and the connection works fine. But the PHP post is a =different setup from the WEBDNA setup so I am not sure the comparison is =actually a good test. But it does show that the TLS 1.2 is working =to the third party servers so I am confident that the Apache and OS X =servers are setup properly. So it leads me to believe their =is something not working correctly within the WEBDNA server when it =comes to the [tcpconnect] [tcpsend] protocol.

So in anyones opinion, =is it the OS X, the Apache, [webdna 8.5.1] that is keeping the =[tcpconnect] [tcpsend] command from working with third party =servers?
[tcpconnect host=3Dinternic.net&portC]
[tcpsend]webdna.us[unurl]%0D%0A%0D%0A[/unurl][/tcpsend]
[/tcpconnect]
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us

Kind regards

Stuart Tremain

Pharoah Lane Software

AUSTRALIA

webdna@plsoftware.com.au

On 1 Jun 2018, at 12:08, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi

OMG!! You are the =bomb. Thanks so much - I=E2=80=99d have been friggin done for without =ya!!

So all =working=E2=80=A6 Just one last thing if you would be so kind. How will I =ensure that it=E2=80=99s going to be TLS 1.2?

Thanks,
<CohesionSig_Diane12.gi=f>
On 1/06/2018, at 1:44 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
This works:

curl https://www.paystation.co.nz/direct/paystation.dll -d =paystation=3D_empty -d pstn_nr=3Dt -d pstn_pi=3D616505 -d =pstn_gi=3DDEVELOPMENT -d pstn_ms=3D234457_73721146464 -d pstn_am=3D7400 =-d pstn_pa=3Dt

see how each piece of =data is sent

-d =name=3Dvalue

You= may need to do

-d name=3D=E2=80=9Cvalue=E2=80=9D when passing text =values
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 11:13, Diane Blackmore <diane@cohesion.co.nz> wrote:

Hi

OK, so I did this from =command line (but same response from webpage);

curl https://www.paystation.co.nz/direct/paystation.dll?paystation=3D=_empty&pstn_nr=3Dt&pstn_pi=3D616505&pstn_gi=3DDEVELOPMENT&=pstn_ms=3D234457_73721146464&pstn_am=3D7400&pstn_pa=3Dt
<=div class=3D"">
but the response =comes back that there=E2=80=99s "not enough input parameters=E2=80=9D =(Error:11). This I believe is coming from Paystation, yet I have all =mandatory fields filled.

https://docs.paystation.co.nz/#authorisation-3-party
<=div class=3D"">
Is this because =there needs to be some sort of pre-initialisation or handshaking or =something?

Thanks,
<CohesionSig_Diane12.gif>
On 1/06/2018, at 12:42 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
It is very easy :)
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 10:41, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi Stuart,

Thanks for quick reply. =I=E2=80=99m sending a TCPConnect to get an XML response back. Curl is =installed.
Will try the below - are you online for =a bit? The below sounds too easy ;)

Cheers,
<CohesionSig_Diane12.gif>
On 1/06/2018, at 12:34 PM, Stuart Tremain =<webdna@plsoftware.com.au> wrote:
Check that you have =curl on the server.
Go to cl and type curl ==E2=80=94version

or

curl https://google.com

if =you get a response all is good.

then just build your curl segment in =the cl, once it is working transfer it to your site

I suspect that it will =work something like this:

[shell]curl https:/www.paystation.co.nz//direct/paystation.dll?all-your-variables-=here[/SHELL]

Unless you are posting an xml file, then you will need to =use some different curl code
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@plsoftware.com.au
On 1 Jun 2018, at 10:25, Diane Blackmore <diane@cohesion.co.nz> wrote:
Hi

Anyone have a curl =written for this in WebDNA as a shell command yet? I=E2=80=99m scared as =heck that my provider is going to switch off support for below TLS 1.2 =and my TCP/IP connect is going to fail after reading earlier posts on =the matter.

I =have a client who does multiple orders per hour and this isn=E2=80=99t =going to go down well if I can=E2=80=99t get the payment gateway working ==E2=80=98cos I don=E2=80=99t know jack about curl.

Happy to pay someone for =this - I can supply you the WebDNA TCP/IP and a development site for you =to work on. But its URGENT please.

Thanks,
<CohesionSig_Diane12.gif>
On 28/05/2018, at 9:53 PM, Tom Duke <tom@revolutionaries.ie> wrote:
Diane,

If =your server supports the correct version of TLS then the SSL connection =should be good. There is no "TLS=3DT" option with =TCPConnect.

Also= you might consider using 'curl' in a [shell] command. I stopped =using TCPConnect a long time ago.

- Tom
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D
Digital Revolutionaries
1st Floor, =Castleriver House
14-15 Parliament Street
Temple Bar,Dublin 2
Ireland
----------------------------------------------
[t]: + 353 1 4403907
[e]: <mailto:tom@revolutionaries.ie>
[w]: <http://www.revolutionaries.ie/>
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D==3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
On 28 May 2018 at 02:40, Diane =Blackmore <diane@cohesion.co.nz> wrote:
Hi

Have finally got things to where they =need to be server-wise for my TLS 1.2 migration, however it is timing =out and not getting anywhere. The bolo is the script;

[TCPConnect host=3Dwww.paystation.co.nz&port=3D443&tls=3DT][tcpsend skipheader=3DT][!]
[/!]POST /direct/paystation.dll HTTP/1.1[crlf][!]
[/!]Referer: https://[theDomain][thisurl][crlf][!]
[/!]Host: www.paystation.co.nz[crlf][!]
[/!]Content-Type: application/x-www-form-urlencoded[crlf][!]
[/!]Content-length: =[countchars][the_variables][/countchars][crlf][!]
[/!]Connection: =close[crlf][!]
[/!][crlf][!]
[/!][the_variables][crlf][!]
[/!][/tcpsend][/TCPConnect]

Now, this works just brilliant with =SSL=3DT in place of TLS=3DT but just hangs the way it is above. I figure =I must be missing something - Can anyone provide the correct syntax as =there=E2=80=99s nothing in the docs about TLS at all.

One other thought is =that the page doing the sending is a regular page on http/80, rather =than being on https/443 - Does this have any bearing? Ie. Would the =request also need to be from a secure site?

Thanks in advance,
<CohesionSig_Diane12.gif>
On 5/03/2018, at 11:32 AM, Stuart Tremain =<webdna@idfk.com.au> wrote:
That looks like an error in the docs

it should read &port=3D80 = or port=3D443
Kind regards

Stuart Tremain
Pharoah Lane Software
AUSTRALIA
webdna@idfk.com.au
On 5 Mar 2018, at 03:18, Bob Knight <bobioknight@gmail.com> wrote:
I have a =question regarding this as well.

So after my shipping and creditcard processing stopped =working after the TLS 1.2 update from UPS and Authorize.net occurred. I discovered it is time to update =the server to the newer OS X 10.12 and the webdna version WebDNA =Server 8.5.1 for Apple OS X Sierra. Now that I have done that =and everything appears to be working, I am still unable to connect to =these third party servers using the [tcpconnect] [tcpsend] parameters =that normally worked for the last 15 years. I tested the =connection to the third party servers using a standard PHP connection =from this same (newly installed server) via a test.php page within the =same website and the connection works fine. But the PHP post is a =different setup from the WEBDNA setup so I am not sure the comparison is =actually a good test. But it does show that the TLS 1.2 is working =to the third party servers so I am confident that the Apache and OS X =servers are setup properly. So it leads me to believe their =is something not working correctly within the WEBDNA server when it =comes to the [tcpconnect] [tcpsend] protocol.

So in anyones opinion, =is it the OS X, the Apache, [webdna 8.5.1] that is keeping the =[tcpconnect] [tcpsend] command from working with third party =servers?
[tcpconnect host=3Dinternic.net&portC]
[tcpsend]webdna.us[unurl]%0D%0A%0D%0A[/unurl][/tcpsend]
[/tcpconnect]
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us
---------------------------------------------------------This message is sent to you because you are subscribed tothe mailing list talk@webdna.usTo unsubscribe, E-mail to: talk-leave@webdna.usarchives: http://www.webdna.us/page.dna?numero=3D55Bug Reporting: support@webdna.us

The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...

Re: [WebDNA] TLS 1.2 and [tcpconnect] URGENT

2018

Top Articles:

Related Readings: