Re: [WebDNA] WebDNA 7 and Deprecated command
This WebDNA talk-list message is from 2011
It keeps the original formatting.
numero = 107833
interpreted = N
texte = Hi Frank! the "commands" have been deprecated, but the Shopping Cart =contexts are still there. We will remove them later as we hope one of =you will design a much better eCommerce system :-) so, yes, WebDNA 7.0 =is comparable to the Partner Edition.- chrisOn Dec 17, 2011, at 17:54, C. Frank Wolfe wrote:> Isn't it safe to say that WEBDna 7 is comparable to WebDNA Partner =Edition tag wise? Cart, is there, but the other shopping cart commands, =addtocart, showcart are not included. =20>=20> Frank>=20>=20> On Dec 16, 2011, at 11:07 AM, christophe.billiottet@webdna.us wrote:>=20>> Hi Walt!>>=20>>> 1) Now I can't find where I saw it, but in some documentation that I =read, I saw a mention that>>>=20>>> Commands were Deprecated in this version.>>>=20>>> Does that mean any sites that use for example the following in the =cart URLs:>>>=20>>> cart.html?command=3Dshowcart&cart=3D1234567890&db=3Ddb/products.db>>>=20>>> would not work on the new 7 platform and would need to be rewritten?>>=20>> exact>>=20>>> 2) Are there any additional changes that would make an existing 6 =site not run on the new version out of the box?>>=20>> Sandboxes, global are related to a centralized version of WebDNA. =Since WebDNA 7.0 runs at site level, this will not be needed anymore, =though it has not been deprecated (yet)>>=20>>=20>>> 3) Are there any special additional configuration changes needed, if =you want WebDNA to also handle .HTML files as well (lets say on a Linux =box)? I know changes were required in 6.>>=20>> WebDNA 7.0 is designed to work with .dna, but if you want to add =.html, this is easy to do.>>=20>>=20>>> 4) Anything else existing users should know about version 7?>>=20>>=20>> Here the history:>>=20>>=20>> Fixed: The serial number validation routine fails out with a wrong =number, and causes the page not reloading.>> ----->> The libmysqlclient.so.15/libmysqlclient.so.16 problem for the glibcv3 =version:>> Ubuntu 10.xx comes with libmysqlclient.so.16, and webdna.fcgi =requests libmysqlclient.so.15>> The two versions of libmysqlclient aren't binary compatible, which is =why the soname was changed from 15 to 16. There is no way to build a =single binary that works with both libraries. We built two binaries.>> ----->> Changed: The 6.2 code always reloaded the db after 100 lines. We =changed this for 1,000 lines on 7.0 code.>> ----->> Fixed: the [append] tag was writing to DISK instead or writing to =RAM. It now depends on the AutoCommit value in prefs.>> If true, it will append each line as before.>> If false, it will buffer in memory.>> ----->> Fixed: the [formvariables] context bug when using =ENCTYPE=3D"multipart/form-data": issue with the processing of multipart =post.>> ----->> Fixed: [sendmail] problem with the FreeBSD version beacuse of a =threading problem. Fixed by forcing it to use libpthread instead of =libc_r>> ----->> Fixed: bug when the [math] variable name includes a number like in =[math]thetest3=3D43[/math]>> --->> New: added the new tag [thirurlplusget]>>=20>> so the [thisurl] tag will produce this:>> /x/y/z/index.dna>>=20>> and the [thirurlplusget] tag will produce this:>> /x/y/z/index.dna?a=3Db&c=3Dd>> --->> New: /WebCatalog folder eliminated>> --->> New: config file is now webdna.ini>> --->> New: [isaccelerated] tag returns "T" or "F">> --->> Fixed: a local copy runs as "licensed" when called through 127.0.0.1 =or "localhost">> --->> Fixed: triggers now work with unlicensed version>> --->> Fixed: the triggers are not properly working>> --->> New: added a solid blowfish code to [encrypt]>> --->> Fixed: [returnraw] - http status codes was not working on all =platforms due of Apache 2.0 changes in the API and also the WebDNA =module was not accommodating all status codes.>> --->> Fixed: [createdate] and [moddate] were being confused on unix =machines in both the [listfiles] context and [fileinfo] context.>> --->> Fixed: [date format=3D] was not working on all platforms>> --->> Fixed: mysql Windows bug>> --->> New: xalan and xerces are now integrated into the binary>> --->> New: [thishost] shows the server name WebDNA is running on>> --->> New: [listallcontexts] shows a list of all reserved context names>> --->> New: [thisport] shows the port number of the server WebDNA is running =on.>> --->> Bug: xerces has some flaws under OSX. See below>>=20>> [xmlparse =var=3Dxml_var1&source=3D[url]http://gdata.youtube.com/feeds/api/videos/-/v=olleyball[/url]][/xmlparse]>> [xmlnode ref=3Dxml_var1&path=3Dnamed:feed]>> [name]=3D[value]
>> [xmlnodes]>> - [name]=3D[value]
>> [xmlnodes]>> - [name]=3D[value]
>> [/xmlnodes]>> [/xmlnodes]>> [/xmlnode]>>=20>> A workaround is to write the WEBDNA to download the XML file, and =then include it in the XMLParse>> Pseudo code:>> [DOWNLOAD FILE source=3Dhttp://.....]>> [XMLParse vars=3Dblah][include target file.xml][/XMLParse]>> --->> Fixed: [setmimeheader] is now working as expected>> example: [setmimeheader name=3DContent-Type&value=3Dtext/xml]>> --->> Fixed: [shownext] was not properly working under OSX with apache>> --->> Fixed: PATH_TRANSLATED under OSX and Solaris>> --->> New: [islicensed] with two values: "T" or "F". If the License number =matches the domain, we will get a "T", otherwise, we get a "F" and =WebDNA will run as freeware.>> --->> Fixed: was not working>> --->> Fixed: [decrypt] could not decrypt the seed "TEMPLATE", for use with =encrypted templates=20>> --->> New: SMTP auth enable with [sendmail].. both a global setting and a =over-riding local setting option (ie. within the [sendmail] context)>> --->> Fixed: [setcookie] was not writing anymore to the browser.>> --->> Fixed: [redirect] was not working anymore.>> --->> Fixed: Passing a value to a page using GET like =test.dna?thetest=3Dthisisasmalltest was just passing "[thetest]" in the =browser: it was not interpreted and showed up.>> --->> Fixed: Introducing an URL variable name using a context name was =producing strange results. The ?text=3D bug is now checking for known =contexts, and if it is not a known context, it does the appropriate =thing. For example, the variable setting via GET is working, but the =?text=3D is blocked>> --->> Fixed: [appendfile file=3Dtest.html]More text[/appendfile] was =creating an empty file when it should have written "More text" in it. =File permission of index.html was 644>> --->> Fixed: [writefile file=3Dtest.html]Some text[/writefile] was creating =an empty file when it should have written "Some text" in it. File =permission of index.html was 660>> --->> Fixed: [ipaddress] was not working anymore under OSX>> --->> Fixed: [referrer] was showing "FastCGI" instead of the real refering =page under OSX.>> --->> Fixed: the delete command could delete items in a database, even when =it is not allowed as a (URL) command.>> --->> Deprecated: XML-like syntax>> Deprecated: [applescript]>> Deprecated: phone home system>> Deprecated: the URL command system>> Deprecated: sandboxes and "global">> Deprecated: old licensing system (domain limits, versions=85)>>=20>>=20>>=20>>=20>> - chris>>=20>> --------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list
.>> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us>> Bug Reporting: support@webdna.us>>=20>=20>=20> ---------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us> Bug Reporting: support@webdna.us
Associated Messages, from the most recent to the oldest:
Hi Frank! the "commands" have been deprecated, but the Shopping Cart =contexts are still there. We will remove them later as we hope one of =you will design a much better eCommerce system :-) so, yes, WebDNA 7.0 =is comparable to the Partner Edition.- chrisOn Dec 17, 2011, at 17:54, C. Frank Wolfe wrote:> Isn't it safe to say that WEBDna 7 is comparable to WebDNA Partner =Edition tag wise? Cart, is there, but the other shopping cart commands, =addtocart, showcart are not included. =20>=20> Frank>=20>=20> On Dec 16, 2011, at 11:07 AM, christophe.billiottet@webdna.us wrote:>=20>> Hi Walt!>>=20>>> 1) Now I can't find where I saw it, but in some documentation that I =read, I saw a mention that>>>=20>>> Commands were Deprecated in this version.>>>=20>>> Does that mean any sites that use for example the following in the =cart URLs:>>>=20>>> cart.html?command=3Dshowcart&cart=3D1234567890&db=3Ddb/products.db>>>=20>>> would not work on the new 7 platform and would need to be rewritten?>>=20>> exact>>=20>>> 2) Are there any additional changes that would make an existing 6 =site not run on the new version out of the box?>>=20>> Sandboxes, global are related to a centralized version of WebDNA. =Since WebDNA 7.0 runs at site level, this will not be needed anymore, =though it has not been deprecated (yet)>>=20>>=20>>> 3) Are there any special additional configuration changes needed, if =you want WebDNA to also handle .HTML files as well (lets say on a Linux =box)? I know changes were required in 6.>>=20>> WebDNA 7.0 is designed to work with .dna, but if you want to add =.html, this is easy to do.>>=20>>=20>>> 4) Anything else existing users should know about version 7?>>=20>>=20>> Here the history:>>=20>>=20>> Fixed: The serial number validation routine fails out with a wrong =number, and causes the page not reloading.>> ----->> The libmysqlclient.so.15/libmysqlclient.so.16 problem for the glibcv3 =version:>> Ubuntu 10.xx comes with libmysqlclient.so.16, and webdna.fcgi =requests libmysqlclient.so.15>> The two versions of libmysqlclient aren't binary compatible, which is =why the soname was changed from 15 to 16. There is no way to build a =single binary that works with both libraries. We built two binaries.>> ----->> Changed: The 6.2 code always reloaded the db after 100 lines. We =changed this for 1,000 lines on 7.0 code.>> ----->> Fixed: the [append] tag was writing to DISK instead or writing to =RAM. It now depends on the AutoCommit value in prefs.>> If true, it will append each line as before.>> If false, it will buffer in memory.>> ----->> Fixed: the [formvariables] context bug when using =ENCTYPE=3D"multipart/form-data": issue with the processing of multipart =post.>> ----->> Fixed: [sendmail] problem with the FreeBSD version beacuse of a =threading problem. Fixed by forcing it to use libpthread instead of =libc_r>> ----->> Fixed: bug when the [math] variable name includes a number like in =[math]thetest3=3D43[/math]>> --->> New: added the new tag [thirurlplusget]>>=20>> so the [thisurl] tag will produce this:>> /x/y/z/index.dna>>=20>> and the [thirurlplusget] tag will produce this:>> /x/y/z/index.dna?a=3Db&c=3Dd>> --->> New: /WebCatalog folder eliminated>> --->> New: config file is now webdna.ini>> --->> New: [isaccelerated] tag returns "T" or "F">> --->> Fixed: a local copy runs as "licensed" when called through 127.0.0.1 =or "localhost">> --->> Fixed: triggers now work with unlicensed version>> --->> Fixed: the triggers are not properly working>> --->> New: added a solid blowfish code to [encrypt]>> --->> Fixed: [returnraw] - http status codes was not working on all =platforms due of Apache 2.0 changes in the API and also the WebDNA =module was not accommodating all status codes.>> --->> Fixed: [createdate] and [moddate] were being confused on unix =machines in both the [listfiles] context and [fileinfo] context.>> --->> Fixed: [date format=3D] was not working on all platforms>> --->> Fixed: mysql Windows bug>> --->> New: xalan and xerces are now integrated into the binary>> --->> New: [thishost] shows the server name WebDNA is running on>> --->> New: [listallcontexts] shows a list of all reserved context names>> --->> New: [thisport] shows the port number of the server WebDNA is running =on.>> --->> Bug: xerces has some flaws under OSX. See below>>=20>> [xmlparse =var=3Dxml_var1&source=3D[url]http://gdata.youtube.com/feeds/api/videos/-/v=olleyball[/url]][/xmlparse]>> [xmlnode ref=3Dxml_var1&path=3Dnamed:feed]>> [name]=3D[value]
>> [xmlnodes]>> - [name]=3D[value]
>> [xmlnodes]>> - [name]=3D[value]
>> [/xmlnodes]>> [/xmlnodes]>> [/xmlnode]>>=20>> A workaround is to write the WEBDNA to download the XML file, and =then include it in the XMLParse>> Pseudo code:>> [DOWNLOAD FILE source=3Dhttp://.....]>> [XMLParse vars=3Dblah][include target file.xml][/XMLParse]>> --->> Fixed: [setmimeheader] is now working as expected>> example: [setmimeheader name=3DContent-Type&value=3Dtext/xml]>> --->> Fixed: [shownext] was not properly working under OSX with apache>> --->> Fixed: PATH_TRANSLATED under OSX and Solaris>> --->> New: [islicensed] with two values: "T" or "F". If the License number =matches the domain, we will get a "T", otherwise, we get a "F" and =WebDNA will run as freeware.>> --->> Fixed: was not working>> --->> Fixed: [decrypt] could not decrypt the seed "TEMPLATE", for use with =encrypted templates=20>> --->> New: SMTP auth enable with [sendmail].. both a global setting and a =over-riding local setting option (ie. within the [sendmail] context)>> --->> Fixed: [setcookie] was not writing anymore to the browser.>> --->> Fixed: [redirect] was not working anymore.>> --->> Fixed: Passing a value to a page using GET like =test.dna?thetest=3Dthisisasmalltest was just passing "[thetest]" in the =browser: it was not interpreted and showed up.>> --->> Fixed: Introducing an URL variable name using a context name was =producing strange results. The ?text=3D bug is now checking for known =contexts, and if it is not a known context, it does the appropriate =thing. For example, the variable setting via GET is working, but the =?text=3D is blocked>> --->> Fixed: [appendfile file=3Dtest.html]More text[/appendfile] was =creating an empty file when it should have written "More text" in it. =File permission of index.html was 644>> --->> Fixed: [writefile file=3Dtest.html]Some text[/writefile] was creating =an empty file when it should have written "Some text" in it. File =permission of index.html was 660>> --->> Fixed: [ipaddress] was not working anymore under OSX>> --->> Fixed: [referrer] was showing "FastCGI" instead of the real refering =page under OSX.>> --->> Fixed: the delete command could delete items in a database, even when =it is not allowed as a (URL) command.>> --->> Deprecated: XML-like syntax>> Deprecated: [applescript]>> Deprecated: phone home system>> Deprecated: the URL command system>> Deprecated: sandboxes and "global">> Deprecated: old licensing system (domain limits, versions=85)>>=20>>=20>>=20>>=20>> - chris>>=20>> --------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us>> Bug Reporting: support@webdna.us>>=20>=20>=20> ---------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us> Bug Reporting: support@webdna.us
christophe.billiottet@webdna.us
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
Date errors? (1999)
Answer: WebDelivery downloads alias, not original ? (1997)
If Empty ? (1997)
PCS Frames (1997)
shipping help (1998)
[blank] (2005)
form image (2000)
WebCat2_Mac RETURNs in .db (1997)
Showif date range comparison (1999)
New Installation (1998)
Automatic thumbnail images (1998)
Add a field to the error log? (1997)
WebCat cannot handle compatible search parameters? (1997)
WebCat hosting providers? - one more option (1997)
Carts & Refering URLs (1997)
[HIDEIF] inside [FOUNDITEM] (1997)
SMTP Mail Server (2003)
Banners (1997)
HELP WITH DATES (1997)
Text data with spaces in them... (1997)