Re: Problems with cybercash
This WebDNA talk-list message is from 2000
It keeps the original formatting.
numero = 32701
interpreted = N
texte = I doesn't seem to be a triggers problem. I doesn't matter if I process orders myself or not I always get the same results codes or lack of. This is the message I get if I process manually:Processing file 30430392492883 with CyberCash status: [MStatus] authnum: [auth-code] response: [MErrMsg] batchnum: refnum: [ref-code] sequencenum: [order-id] itemnum: address_response: [avs-code] John Davies wrote:> Marc, > > I had/have the exact same problem. Below is the suggested solution from SM > support. It works fine for a while, however if the triggers ever run it > screws up the whole thing again, of course that means that you need to > process the orders through the admin page manually. I have the best success > by following the steps below, and then eliminating the trigger from the > trigger.db file. I was able to get a good 3-4 weeks of success with this > method, before it went awry again. I have been in touch with SM support > concerning the on-going problem, but they have not responded. I am surviving > with this work around until the 4.0 upgrade comes out. > > Good Luck > > John Davies > jd@professionalideas.com > _____________________________________________ > Martin Associates Design Agency > http://www.professionalideas.com > > SUGGESTED SOLUTION: > At 04/27/2000 03:20 PM we wrote - > > I would like you to upgrade to 3.08, the 3.08 > on the CD(3.08b11) has a bad serail number code, but the one at > ftp://ftp.smithmicro.com should take the serial # fine. Please > download 3.08 in a new directory and take the plugin, the > Webmerchant folders from the Globals folder and the TeaRoom floder > and replace them with yours. > > > From: Marc
> > Reply-To: (WebCatalog Talk) > > Date: Mon, 05 Jun 2000 08:03:17 > > To: (WebCatalog Talk) > > Subject: Problems with cybercash > > > > Hi everyone, > > > > It seems that I'm no longer connecting to cybercash, I did a complete > > reinstall of webcat+webmerchant. I then took the invoice templates from > > tearoom and still no change. Does anyone have any ideal on what could > > possibly be happening. > > > > [!]--------------- Below is errors i get---------------------[/!] > > > > payment method: CC > > account number: ************1111 > > expiration: 1/2002 > > > > Credit card authorization: [auth-code] > > Status of Authorization: [MStatus] > > MacAuthorize Response: [MErrMsg] > > MacAuthorize Batch#: > > MacAuthorize Item# in Batch: > > > > > > > > > > -- > > Marc Malacarme > > Lauren Stomel Advertising > > 1-310-451-5114 > > > > > > > > ------------------------------------------------------------- > > This message is sent to you because you are subscribed to > > the mailing list . > > To unsubscribe, E-mail to: > > To switch to the DIGEST mode, E-mail to > > > > Web Archive of this list is at: http://search.smithmicro.com/ > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > Web Archive of this list is at: http://search.smithmicro.com/-- Marc Malacarme Lauren Stomel Advertising 1-310-451-5114------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://search.smithmicro.com/
Associated Messages, from the most recent to the oldest:
I doesn't seem to be a triggers problem. I doesn't matter if I process orders myself or not I always get the same results codes or lack of. This is the message I get if I process manually:Processing file 30430392492883 with CyberCash status: [MStatus] authnum: [auth-code] response: [MErrMsg] batchnum: refnum: [ref-code] sequencenum: [order-id] itemnum: address_response: [avs-code] John Davies wrote:> Marc, > > I had/have the exact same problem. Below is the suggested solution from SM > support. It works fine for a while, however if the triggers ever run it > screws up the whole thing again, of course that means that you need to > process the orders through the admin page manually. I have the best success > by following the steps below, and then eliminating the trigger from the > trigger.db file. I was able to get a good 3-4 weeks of success with this > method, before it went awry again. I have been in touch with SM support > concerning the on-going problem, but they have not responded. I am surviving > with this work around until the 4.0 upgrade comes out. > > Good Luck > > John Davies > jd@professionalideas.com > _____________________________________________ > Martin Associates Design Agency > http://www.professionalideas.com > > SUGGESTED SOLUTION: > At 04/27/2000 03:20 PM we wrote - > > I would like you to upgrade to 3.08, the 3.08 > on the CD(3.08b11) has a bad serail number code, but the one at > ftp://ftp.smithmicro.com should take the serial # fine. Please > download 3.08 in a new directory and take the plugin, the > Webmerchant folders from the Globals folder and the TeaRoom floder > and replace them with yours. > > > From: Marc > > Reply-To: (WebCatalog Talk) > > Date: Mon, 05 Jun 2000 08:03:17 > > To: (WebCatalog Talk) > > Subject: Problems with cybercash > > > > Hi everyone, > > > > It seems that I'm no longer connecting to cybercash, I did a complete > > reinstall of webcat+webmerchant. I then took the invoice templates from > > tearoom and still no change. Does anyone have any ideal on what could > > possibly be happening. > > > > [!]--------------- Below is errors i get---------------------[/!] > > > > payment method: CC > > account number: ************1111 > > expiration: 1/2002 > > > > Credit card authorization: [auth-code] > > Status of Authorization: [MStatus] > > MacAuthorize Response: [MErrMsg] > > MacAuthorize Batch#: > > MacAuthorize Item# in Batch: > > > > > > > > > > -- > > Marc Malacarme > > Lauren Stomel Advertising > > 1-310-451-5114 > > > > > > > > ------------------------------------------------------------- > > This message is sent to you because you are subscribed to > > the mailing list . > > To unsubscribe, E-mail to: > > To switch to the DIGEST mode, E-mail to > > > > Web Archive of this list is at: http://search.smithmicro.com/ > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > Web Archive of this list is at: http://search.smithmicro.com/-- Marc Malacarme Lauren Stomel Advertising 1-310-451-5114------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://search.smithmicro.com/
Marc
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
How to Sort Summ data ? (1997)
OK, here goes... (1997)
Problems getting parameters passed into email. (1997)
WebCat2: Items xx to xx shown, etc. (1997)
Requiring that certain fields be completed (1997)
Nested vs conditional (1997)
WebCat2 several catalogs? (1997)
upgrading (1997)
Trying to evaluate data that is stored in an indexed (2000)
Protect (1997)
5.0 Preview Promotion Extension (2003)
Re: (1997)
More news on 5.0 (2003)
Not really WebCat (1997)
[WebDNA] .html suffix (2014)
F2 to F3 rocky transition (1997)
Date AND time (2001)
[WebDNA] Line ending issues (2009)
[append] and SSL (1997)
WCS Newbie question (1997)