Re: Freeze
This WebDNA talk-list message is from 2003
It keeps the original formatting.
numero = 47731
interpreted = N
texte = Thought you were talking about the power discharge. I've only attempted the mu reset on the older units. Don't know if the button is on the newer boards or not.On Wednesday, February 12, 2003, at 06:58 PM, Stuart Tremain wrote:> There was a button, you had to know where and what to look for on the > older boards. It was not the power button. > > On Thursday, February 13, 2003, at 01:53 PM, Michael Davis wrote: > >> I have not tried it. I suppose you would use the power key on the >> front of the box. It wouldn't be too hard to test, I suppose. >> >> On Wednesday, February 12, 2003, at 06:39 PM, Stuart Tremain wrote: >> >>> Is this still available on the new G4 boxes ? >>> >>> On Thursday, February 13, 2003, at 01:30 PM, Michael Davis wrote: >>> >>>> On the older macs prior to USB, it's also a good idea to discharge >>>> the power supply before removing batteries and pushing the memory >>>> unit reset button. To do this, disconnect the power cord and then >>>> press the keyboard power key (adb cord still plugged in, of >>>> course). On my desktop beige G3 box, there's enough of a charge to >>>> get a startup chime and a momentary fan! >>>> >>>> On Wednesday, February 12, 2003, at 01:59 PM, Stuart Tremain wrote: >>>>> LAST RESORT >>>>> >>>>> Reset the board. This involves turning the power off, taking out >>>>> the battery, leaving disconnected for a while and then finding the >>>>> reset button. >>>>> >>>>> This was shown to me by an Apple engineer, it worked in my >>>>> situation on an older model Mac, not sure if it can be done with >>>>> the new boxes. It may take a bit of research. >>>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------- >>>> This message is sent to you because you are subscribed to >>>> the mailing list
. >>>> To unsubscribe, E-mail to: >>>> To switch to the DIGEST mode, E-mail to >>>> >>>> Web Archive of this list is at: http://webdna.smithmicro.com/ >>>> >> >> >> ------------------------------------------------------------- >> This message is sent to you because you are subscribed to >> the mailing list . >> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to >> >> Web Archive of this list is at: http://webdna.smithmicro.com/ >> >> > Regards > > Stuart Tremain > idfk web developments > 114a/40 yeo street neutral bay 2089 australia > t +612 9908 2134 > f +612 9908 4837 > > > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > > Web Archive of this list is at: http://webdna.smithmicro.com/ > > Michael Davis, President Kondooit, Inc. Voice: 503.295.0609 3603 S.E. Sherman St. Fax: 208.361.5696 Portland, OR 97214- Broadband Internet Services http://www.kondooit.com/ Co-Location | Hosting | Fixed Wireless | Web Design ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Associated Messages, from the most recent to the oldest:
Thought you were talking about the power discharge. I've only attempted the mu reset on the older units. Don't know if the button is on the newer boards or not.On Wednesday, February 12, 2003, at 06:58 PM, Stuart Tremain wrote:> There was a button, you had to know where and what to look for on the > older boards. It was not the power button. > > On Thursday, February 13, 2003, at 01:53 PM, Michael Davis wrote: > >> I have not tried it. I suppose you would use the power key on the >> front of the box. It wouldn't be too hard to test, I suppose. >> >> On Wednesday, February 12, 2003, at 06:39 PM, Stuart Tremain wrote: >> >>> Is this still available on the new G4 boxes ? >>> >>> On Thursday, February 13, 2003, at 01:30 PM, Michael Davis wrote: >>> >>>> On the older macs prior to USB, it's also a good idea to discharge >>>> the power supply before removing batteries and pushing the memory >>>> unit reset button. To do this, disconnect the power cord and then >>>> press the keyboard power key (adb cord still plugged in, of >>>> course). On my desktop beige G3 box, there's enough of a charge to >>>> get a startup chime and a momentary fan! >>>> >>>> On Wednesday, February 12, 2003, at 01:59 PM, Stuart Tremain wrote: >>>>> LAST RESORT >>>>> >>>>> Reset the board. This involves turning the power off, taking out >>>>> the battery, leaving disconnected for a while and then finding the >>>>> reset button. >>>>> >>>>> This was shown to me by an Apple engineer, it worked in my >>>>> situation on an older model Mac, not sure if it can be done with >>>>> the new boxes. It may take a bit of research. >>>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------- >>>> This message is sent to you because you are subscribed to >>>> the mailing list . >>>> To unsubscribe, E-mail to: >>>> To switch to the DIGEST mode, E-mail to >>>> >>>> Web Archive of this list is at: http://webdna.smithmicro.com/ >>>> >> >> >> ------------------------------------------------------------- >> This message is sent to you because you are subscribed to >> the mailing list . >> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to >> >> Web Archive of this list is at: http://webdna.smithmicro.com/ >> >> > Regards > > Stuart Tremain > idfk web developments > 114a/40 yeo street neutral bay 2089 australia > t +612 9908 2134 > f +612 9908 4837 > > > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > > Web Archive of this list is at: http://webdna.smithmicro.com/ > > Michael Davis, President Kondooit, Inc. Voice: 503.295.0609 3603 S.E. Sherman St. Fax: 208.361.5696 Portland, OR 97214- Broadband Internet Services http://www.kondooit.com/ Co-Location | Hosting | Fixed Wireless | Web Design ------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Michael Davis
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
When do we get to request new features? (1999)
Return records from another (1997)
[WebDNA] My SQL will not Connect (2020)
F3 crashing server (1997)
WebCat B13 Mac CGI -- Frames question (1997)
New Webcatalog for Mac (1997)
Re:Change WebDNA-Talk Mail due to no digest for 1wk (1997)
Payment Processors (2005)
emailer cc to figured out (1997)
can WC render sites out? (1997)
NewCart+Search with one click ? (1997)
transferring values (1998)
case sensitivity in lookups (1997)
[AppendFile] problem (WebCat2b13 Mac .acgi) (1997)
problems with 2 tags (1997)
[WebDNA] Secure cookies (HttpOnly/Secure) (2013)
Navigator 4.01 (1997)
help with http upload (2000)
cookies and [returnraw] (1997)
[OT] maximum POST variable size (2007)